Is your garage door squeaking, rattling, and creaking like it’s playing in a rock band? If so, it’s time to end the noise and bring peace back to your home. Besides the annoying sounds, your garage door might be signaling deeper problems that need repair.
Here’s how to diagnose and repair that noisy garage door so you can enjoy a peaceful day without any creaking and squeaking noises annoying you.
Why Does Your Garage Door Creak?
That creaking in your garage door may sound like something from a horror movie, but more likely, it’s a cry for help. Most likely, the rollers, springs, and hinges on your door have run dry of lubricant, are loose from usage, or are just plain old and worn out. The metal parts could be undergoing rapid expansions and contractions with temperature swings, or they might be stretched out in awkward positions from having rails that are not quite aligned properly.
Read More: Reasons why you should never ignore a creaking garage door
How To Troubleshoot a Noisy Garage Door
Here are some suggestions on what you can do to help your garage door crying for help:
Identify the Source of the Noise
First, identify where the noise is coming from. It may originate from the rails, the opener, or the door itself. Carefully observe when you open and close the door to determine the source more precisely.
Lubricate Moving Parts
Lubrication is very important for your garage door. Frequent lubrication drastically reduces the noise. It is recommended to use silicone-based spray or garage door lubricant for lubricating rollers, hinges, tracks, and springs.
Tighten the Loose Hardware
One of the most frequent causes of noise in garage doors is loose screws and bolts. Using a wrench or socket set, tighten all the hardware on the door and its tracks. Do not overtighten, as this might potentially lead to damage.
Check the Springs
Worn-out garage door springs and those that have not been looked after also make a great deal of noise. While it is possible to replace the springs on your own, it can be dangerous. The better way would be to arrange for a professional like Garage Door Repair for replacement if they appear too worn or rusty.
Replace Worn Out Rollers
Metal or worn-out rollers can also cause creaking. Over time, they will become tight or broken, which will cause a lot of noise. Therefore it is better to replace any rollers that are worn down.
Also Read: here’s how to fix a bad garage door
Examine the Hinges
Hinges that have worn out or are broken can make the door go out of alignment and thus produce noise. Check the hinges for wear and replace any broken or worn-out ones.
Inspect the Tracks
Other sources of noise include track misalignment or dirty tracks. Clean them with a damp cloth and make sure they are properly aligned. Bent or heavily damaged tracks may need to be replaced.
Check the Opener Chain or Belt
A noisy garage door opener can also be a source of the problem. Inspect the chain or belt drive for signs of wear or looseness. Tightening or lubricating these components can significantly reduce noise.
Ensure Proper Balance
An unbalanced garage door can strain the opener and create noise. Test the door balance by disconnecting the opener and manually lifting the door halfway. If it doesn’t stay in place, the door may need balancing, which often requires professional adjustment.
Ready to Restore Peace? Fix Your Noisy Garage Door Now!
By following the above-mentioned tips and tricks, you can silence that annoying creaking garage door for good! But if you’re still having problems with your garage door, fear not! look no further than Shon Garage Door Repair San Diego. Known for their efficiency in garage door repair, they can easily silence those pesky creaks and groans.
With an extremely professional team of technicians, they ensure that everything from rollers to springs will be inspected and serviced properly.
