Technology is evolving and most of us are fortunate enough to have access to a few devices which make our lives easier & better. Among these gadgets, we also have one that controls the garage door which is the garage door remote control.
If you lose your garage door remote or it suddenly stops working, you’re not left with much choice but to replace your old garage door remote with a brand new one.
In this article, we are going to talk about what you should do, just in case your garage door remote suddenly stops working for any reason. A non-working garage door can be a terrible nuisance in your life. So, without further ado, let’s learn everything about it.
Check the Batteries – It’s the Obvious (But Often Overlooked) Culprit
This might seem simple, but it’s the most common reason a remote stop working. Batteries don’t last forever, and even a slight decrease in power can disrupt the signal. Start by replacing the batteries with fresh ones of the correct type. If your garage door opens using the wall-mounted control panel, but not the remote, this is a strong indication that dead batteries are the problem.
Inspect the Receiver Unit on the Garage Door – Is the Signal Getting Through?
The receiver unit is the part of the garage door opener that receives the signal from your remote. It’s usually located near the motor unit on the ceiling. Make sure the receiver unit is plugged in and powered on. Check for any loose wires or damage to the unit itself. You can also try cleaning the antenna on the receiver unit with a soft cloth to remove any dust or debris that might be blocking the signal.
Reprogram the Garage Door Remote Control – Sometimes a Refresh is All It Needs
Over time, the programming between your remote and the receiver unit can become corrupted. Reprogramming your remote is a relatively simple process that usually involves pressing a button on the receiver unit and then holding down a button on your remote. Consult your garage door opener manual for specific instructions on how to reprogram your remote.
Also Read: How Do You Fix a Bad Garage Door
If Nothing Works, Replace the Garage Door Remote – It Might Be Time to Say Goodbye
If you’ve tried all the above steps and your remote still isn’t working, it’s possible that the remote itself is faulty. In this case, you’ll need to replace it. When choosing a new remote, make sure it’s compatible with your garage door opener model. You can usually find replacement remotes online or at your local hardware store.
General Safety:
Never attempt to force the garage door open or closed. This can damage the door, or opener, or even cause injury.
Keep children and pets away from the garage door while it’s operating. Even a seemingly “safe” movement can pinch or trap fingers or limbs.
Be aware of your surroundings when opening or closing the garage door. Make sure there are no obstacles in the way and no people or pets directly under the door.
Never leave the garage door open and unattended. This is an invitation to theft and potential break-ins.
Battery Safety:
Use the correct type and size of batteries as specified in your garage door opener manual. Mismatched batteries can leak or damage the remote.
Dispose of used batteries properly. Do not throw them in the trash, as they contain harmful chemicals. Most hardware stores and other retailers have battery recycling bins.
Frustrated with a Stalled Garage Door Remote? Don’t Get Locked Out!
Is your once-reliable garage door remote suddenly playing dead?
Don’t waste time wrestling with faulty batteries, confusing reprogramming, or the stress of a stuck garage door. Shon Garage Doors is here to help!
Our team of experienced technicians are experts in diagnosing and repairing all types of garage door remote issues and performing remote control programming.
We’ll check the problem, whether it’s a simple battery replacement, receiver malfunction, or programming glitch, and get your door working smoothly again.
